Singapore Polymer Corp. (Pte) Ltd

SINPOLENE PROCESSING AID MASTERBATCH

Grade

Additive (%)

Base Resin

Melt Index

Dosage (%)

Characteristics / Applications

MBN 7541

3.5

LLDPE

4

2 ~ 4
Eliminate or reduce melt fracture and die build up during processing of LLDPE and HDPE. Also effective in increasing throughput and reducing power consumption.

MBN 5374

3

PP

7

2 ~ 4
Eliminate or reduce melt fracture and die build up during processing of PP. Also effective in increasing throughput and reducing power consumption.

Singapore Polymer Corporation Pte Ltd reserves the right to change its products any time. Data provided in this web publication may not always be updated. Information provided herein is for general information and is given in good faith. Specific technical information and directives must be obtained from our representatives before using our products, to determine the suitability for any particular use. No warranty is given nor is to be implied with respect to information given herein. Values presented are typical and intended to serve as guides only, and should not be considered as limits to the specifications. Freedom under patents, copyright and registered designs cannot be assumed.

Back to Additive Concentrates (Main Page)

Grade	Additive (%)	Base Resin	Melt Index	Dosage (%)	Characteristics / Applications
MBN 7541	3.5	LLDPE	4	2 ~ 4	Eliminate or reduce melt fracture and die build up during processing of LLDPE and HDPE. Also effective in increasing throughput and reducing power consumption.
MBN 5374	3	PP	7	2 ~ 4	Eliminate or reduce melt fracture and die build up during processing of PP. Also effective in increasing throughput and reducing power consumption.